Patcher

MuhRO Patcher는 게임을 업데이트하고, Master Account로 로그인하며, 클라이언트를 구성하고 사용자 지정할 수 있는 도구를 제공합니다.

이 가이드는 패처 버전 1.0.45를 설명합니다. 통합 Game Setup은 버전 1.0.44에서 도입되었습니다. 아래의 버튼 이름은 영어 인터페이스를 기준으로 합니다. 사용 가능한 옵션은 원본 클라이언트와 베타 클라이언트 간에 다를 수 있습니다.

시작하기

1. 게임 폴더에서 MuhRO Patcher를 엽니다. 업데이트를 설치하기 전에 실행 중인 게임 클라이언트를 모두 닫습니다.
2. 패치가 완료될 때까지 기다립니다. 업데이트가 실패하면 상태 메시지를 확인합니다. 필요한 업데이트가 완료될 때까지 로그인 및 게임 시작은 불가능합니다.
3. 원본 클라이언트를 처음 실행하기 전에 Client Tools > Game Setup을 엽니다. 그래픽 장치와 해상도를 선택하고, 필요하면 Test graphics를 사용한 후 Save를 클릭합니다. 성공 메시지가 나타나면 설정 창을 닫습니다.
4. Master Account 이메일 주소와 비밀번호를 입력합니다. 로그인 후, 플레이할 게임 계정의 이름을 클릭합니다.

패처는 실행 전에 원본 클라이언트의 저장된 그래픽 설정을 확인합니다. 설정이 없거나 유효하지 않으면 Game Setup이 열리며, 계속하려면 설정을 성공적으로 저장해야 합니다. 창을 열거나 취소하기만 해서는 설정이 완료되지 않습니다. 기존의 유효한 설정은 재사용할 수 있습니다.

설정을 저장한다고 해서 게임이 자동으로 시작되지는 않습니다. Game Setup을 닫고 준비가 되면 게임 계정을 선택하세요.

메인 창

The main patcher window with the Master Account sign-in form.

영역	목적
Community	Forum, Wiki, Website 및 Discord를 엽니다.
Client Tools	Game Setup, Turbo Setup, /greymap + LGP 및 Addons를 엽니다.
Patcher Control	업데이트를 취소하거나 패치를 다시 시도합니다. 선택된 Patch Host는 선호하는 다운로드 서버를 제어합니다.
Proxy Latency	사용 가능한 연결 경로를 측정합니다.
Language	패처의 인터페이스 언어를 변경합니다.
Server Status	Map, Char 및 Login 서비스 상태와 함께 Players, Shops 및 Alts를 표시합니다.
Latest News	최근 MuhRO 뉴스와 공지사항을 표시합니다. 기사를 선택하여 읽으세요.
Account area	Master Account에 로그인하고 사용 가능한 게임 계정을 표시합니다.
Progress and status	현재 업데이트 또는 작업과 주의가 필요한 오류를 표시합니다.
Version	사이드바 하단에 패처 버전을 표시합니다. 지원 요청을 위해 선택하여 복사할 수 있습니다.

언어 선택기는 System language, English, German, French, Spanish, Portuguese, Russian, Czech, Japanese, Malay, Indonesian 및 Thai를 제공합니다. 변경해도 런처 세션은 유지됩니다. 이는 게임의 언어나 모든 개별 구성 도구가 아닌 패처 인터페이스를 변경합니다.

패칭 및 다운로드 서버

패처는 열릴 때 업데이트를 확인합니다. 작업이 완료되고 상태가 준비되었다고 보고할 때까지 열어 두세요.

• Cancel update는 현재 업데이트 취소를 요청합니다. 패처가 취소를 완료할 때까지 기다립니다.
• Retry patching은 오류나 취소 후 다른 업데이트 시도를 시작합니다.
• Update Now는 실행 중인 패처가 새 패치를 감지하면 나타납니다. 사용하기 전에 모든 게임 클라이언트를 닫으세요.
• Patch Host는 이 컴퓨터에 선호하는 다운로드 서버를 저장합니다. 다음 업데이트 시도 시 먼저 시도됩니다. 다른 호스트는 대체로 사용될 수 있습니다.

LIVE에서는 사용 가능한 다운로드 호스트에 Patcher EU, Patcher EU 2 및 Patcher NA가 포함됩니다. TEST 패처는 자체 호스트 목록을 가지고 있습니다. Patch Host를 변경하면 패치 다운로드에 영향을 줍니다. 게임 내 프록시를 선택하지는 않습니다.

업데이트가 실패하면 오류를 읽고, 실행 중인 클라이언트를 닫고 다시 시도하세요. 다운로드가 계속 불안정하면 다른 Patch Host를 선택하고 다시 시도하세요. 도움을 요청할 때 정확한 오류와 패처 버전을 포함하세요.

지원되는 사용자 지정을 위해 아래에 설명된 Addons 및 Custom GRF 컨트롤을 사용하세요. 이는 이전 가이드의 수동 패치 다운로드 및 아카이브 편집 지침을 대체합니다.

로그인 및 게임 계정 실행

Master Account 이메일 주소와 Master Account 비밀번호로 로그인하세요. 개별 게임 계정의 사용자 이름과 비밀번호는 이 양식의 자격 증명이 아닙니다.

Remember e-mail은 다음 로그인을 위해 이메일 주소를 저장합니다. 패처에는 유효한 동안 자동으로 로그인할 수 있는 별도의 저장된 런처 세션도 있습니다. 패처를 닫아도 로그아웃되지 않습니다. 특히 공용 컴퓨터에서는 저장된 세션을 종료하려면 Logout을 사용하세요.

로그인 후:

• 게임 계정의 이름을 클릭하여 실행합니다.
• Online 및 Offline은 계정의 보고된 상태를 표시합니다. 온라인 계정은 Click to Kick을 제공합니다. 이는 연결 해제를 요청합니다. 다시 실행하기 전에 몇 초간 기다리세요.
• B 표시는 대여된 계정을 나타냅니다.
• Filter accounts는 계정 목록을 검색합니다.
• 계정 행을 드래그하여 순서를 변경하거나 Move to top 및 Move to bottom을 사용하세요. 순서는 이 컴퓨터에 저장됩니다. Reset order는 저장된 순서를 제거합니다.
• Refresh Now는 계정 목록과 상태를 다시 로드합니다.
• Manage는 웹사이트에서 Master Account 관리를 엽니다.
• Create new Game Account는 계정 생성 페이지를 엽니다.

The game-account list after sign-in. These are example accounts.

Beta client

Launch beta client appears only when your account is allowed to use it. Select it before clicking a game account. The patcher downloads or verifies the required beta files before launching.

The checkbox starts unchecked in a new patcher session. The original client's Game Setup does not configure the beta client's graphics. Use the beta client's own settings for that client.

Game Setup

Open Client Tools > Game Setup to configure the original client inside the patcher. A separate OpenSetup application is no longer needed for this workflow.

Close running original clients before changing settings. Some preferences are shared across characters and client installations in the same Windows environment or Wine prefix. The patcher may require every original client to be closed before saving shared settings.

Game Setup loads your current configuration and contains four tabs: Display, Audio, Game and Maintenance.

• Save applies the settings and reports the result. The window remains open after a successful save.
• Cancel or the close button discards unsaved form edits.
• Reset display and audio puts defaults into the form. Review them and click Save to apply them. It also resets the displayed quality and window/input options but keeps the Game tab's command toggles.

Maintenance actions have their own confirmation and take effect immediately after confirmation. Closing the dialog or pressing Cancel does not undo a completed maintenance action.

Display

For a first setup, select a detected graphics device and a windowed resolution that fits your display. Reset display and audio prefers DirectX 9, 1280 x 720 and 32-bit color when these are available. These are starting defaults; you can choose a different supported mode.

The Display tab with an example graphics device and windowed resolution.

Setting	What it does
Graphics API	Selects DirectX 7 or DirectX 9 for the original client. The available devices and modes depend on this choice and the installed renderer.
Graphics device	Selects a device detected on your computer. Choose one from the list. Recheck this setting after a graphics driver or renderer change.
Resolution	Sets the game's render size. Choose an offered mode for fullscreen. Custom Width and Height are available for windowed play within the supported limits.
Color Depth	Selects an available color depth, normally 32 bit or 16 bit. Availability depends on the device and mode.
Fullscreen	Starts the original client in fullscreen. Fullscreen and Borderless window cannot be enabled together.
Test graphics	Opens a preview of the selected mode for up to 15 seconds. Press Escape to close it early. Testing does not save settings or launch your game account.
Set Windows high performance GPU	Sets Windows' graphics preference for the game executable. This Windows-only option can be useful on systems with more than one GPU. The actual result depends on the driver and hardware.

After a successful preview, click Save. If the preview fails, return to a supported device and mode before trying again.

Window and input options

Additional controls are shown when the installed client provides ROExt support. Save changes and restart the game to use them.

Window options with the Minimize with Ctrl+W checkbox enabled.

Setting	What it does
Borderless window	Uses a window without the normal border. Leave Fullscreen disabled for this mode.
Custom borderless size	Enables the custom window position and size fields. Window X and Y set its position; Window Width and Height set its size.
Always on top	Keeps the game window above ordinary windows.
Remap extra mouse buttons	Enables ROExt's additional mouse-button mapping. It does not provide a custom binding editor.
Close with Alt+PrintScreen instead of Alt+F4	Changes ROExt's close shortcut to reduce accidental closes with Alt+F4.
Reduce CPU use in the background	Reduces CPU use while the game window is inactive.
Disable VSync	Disables vertical synchronization through ROExt. This may change frame pacing and can allow tearing.
Disable screen fading	Disables the supported fade-out and fade-in transitions.
Minimize with Ctrl+W	Check this box to let Ctrl+W minimize the game window. Uncheck it to disable the shortcut. Save and restart the game to apply the change.
Allow cursor outside the game window	A legacy compatibility option. The current ROExt build does not implement the old MouseFreedom setting, so this checkbox does not provide that behavior in the current build.

Audio

BGM enables background music and Sound effects enables game sounds. Each has a volume slider from 0 to 100.

Audio device options and separate music and sound-effect volumes.

The advanced controls are:

Setting	Choices
Sound mode	No sound, 2D sound or 3D sound.
Speaker mode	Stereo, Headphones, Surround or Four speakers.
Sound channels	48, 32 or 16.
Sound frequency	22050, 11025 or 8000 Hz.
Sound quality	16 bit or 8 bit.

Some advanced sound settings are legacy preferences and may have no audible effect in a particular client build. Save and restart the game after changing them. If sound is missing, check Sound mode, the BGM and Sound effects switches, their volumes and the Windows or Wine audio output.

Game

This tab includes Trilinear filtering, Mouse exclusive, Sprite quality and Texture quality. Sprite and texture quality offer Low, Medium and High.

The Game tab contains quality options and client command preferences.

The remaining checkboxes store client command preferences. The table lists the controls and their associated commands. Some are legacy client features; availability and behavior depend on the client build.

Group	Preferences
Input and targeting	Battle mode (/battlemode), No Shift skill use (/noshift), No Ctrl attack lock (/noctrl), Attack snap (/snap), Item snap (/itemsnap), Skill snap (/skillsnap), Battle target guide (/btg), Quick slot 1 (/q1) and Quick slot 2 (/q2).
Chat and messages	Block trade requests (/notrade), Skill failure messages (/skillfail), Hide public chat (/notalkmsg), Hide guild chat (/notalkmsg2) and Login messages (/loginout).
Names and interface	Show names (/showname), Window snap (/window), Shopping board (/shopping), Status icons (/stateinfo), Monster HP bar (/monsterhp), Minimap (/minimap), Guild emblems (/emblem), Show shops (/showshop) and First-run tips (/firstrun).
Graphics and camera	Fog (/fog), Auras (/aura), Alt aura display (/aura2), Miss display (/miss), Effects (/effect), Camera rotation (/camera), Light map (/lightmap), Quake effect (/quake), Sprite mable (/mable), Expanded sight (/zoom) and Mineffect (/mineffect).
AI preferences	Homunculus AI (/hoai) and Mercenary AI (/merai).
Legacy shortcut buttons	Cash shop button (/cashshop), Gold PC button (/goldpc) and Roulette button (/roulette).

Some labels need additional context:

• No Ctrl attack lock allows automatic attacking without holding Ctrl.
• Quick slot 1 uses right-click for F9. Quick slot 2 uses the mouse wheel for F7 and F8.
• Hide guild chat stores the broader /notalkmsg2 preference, which hides chat messages including guild chat.
• Show names changes the character-name font and detail style. It is not a name-visibility switch.
• Shopping board controls single-left-click shop opening and right-click closing.
• Status icons controls status-icon descriptions.
• Battle target guide controls the battleground icon.
• Camera rotation stores the camera-zoom preference.
• Auras stores the client's simplified aura preference. Alt aura display controls aura visibility.
• Expanded sight is the camera zoom-out preference. It does not increase targeting range.
• Sprite mable is the Spirit Marble effect preference, also called Sprite Marble in the client's messages.

Maintenance and backups

Use Maintenance when a specific client preference or cache needs repair. Read the confirmation before continuing. Close the game first so it cannot write old settings back or keep files open.

Maintenance actions create backups before changing the selected settings or files.

Action	Result
Reset window and chat positions	Backs up and resets saved interface and chat-window positions. Useful for windows that are misplaced or off screen.
Reset remembered skill levels	Resets the client's remembered skill-use levels. It does not reset learned skills or refund skill points.
Clear emblem cache	Moves the cached guild emblems to backup so the client can recreate its cache.
Move screenshots to backup	Moves the current screenshot folder into the dated backup.
Move replays to backup	Moves the current replay folder into the dated backup.
Move chat logs to backup	Moves the current chat-log folder into the dated backup.
Reset graphics, interface and skill levels	Backs up and resets the corresponding client options and remembered interface/skill preferences. Review and save Game Setup before launching again. This action does not erase game accounts, character progress, installed patches or your screenshot, replay and chat-log folders.

The result shows the backup location under savedata/setup-backups in your game folder. Keep this backup if you might need to recover files or settings. The included backup.json records the action and restoration information. There is no automatic Restore button in Game Setup; ask support if you need help restoring a backup.

Interface positions and remembered skill levels can be shared across all original clients and characters using the same Windows environment or Wine prefix.

Turbo Setup

Open Client Tools > Turbo Setup to edit Turbo bindings in the configuration window. Normal configuration no longer requires editing a file in Notepad.

Turbo repeats a configured action while you hold its assigned key, the controller is enabled and the game is focused. Release the key to stop repeating. Use the pause shortcut while the game is focused to turn the controller on or off. The default Pause Key is P, making the shortcut Alt+P. The default starting state is Off.

Adding and editing bindings

1. Under Add Binding, choose the binding type.
2. Capture the key you want to use. For a skill or item, use the key assigned to its in-game hotbar slot.
3. Set the delay between repeats and click + Add.
4. Review the binding list and click Save.
5. In the game, enable Turbo with Alt+P if using the default pause key, then hold the assigned key.

Binding type	Use
Smart Left	Presses the skill key and clicks at the mouse position. Use it for skills that require a target or ground selection.
Alt+Right click	Repeats Alt+right-click. This action does not press a skill hotbar key.
Turbo	Repeats the assigned key. Use it for actions that work from the hotbar without a target click, such as suitable self-use skills or consumables.

Each key should have one binding. Existing rows let you change the type, key and delay or delete the binding. Delays are in milliseconds and can range from 1 to 10000. The initial default is 10 ms. A delay is the minimum wait after an action, not a guaranteed cast rate. A shorter delay does not remove skill cooldowns, cast times or server restrictions.

You can change the Pause Key, Default State and Default Delay. The pause shortcut uses Alt plus the configured Pause Key. Changing Default Delay does not rewrite the delays already set on existing bindings. Changing Default State also updates the enabled state in a running client.

Save writes the configuration to MuhTurbo.ini. The current original client automatically reloads valid changes without needing a restart.

Profiles and other Turbo controls

• Selecting a profile loads its saved configuration. Save current edits before selecting another profile.
• Save saves edits to the selected profile. Saving an inactive profile does not activate it.
• Switch makes the selected profile active and saves it.
• New creates a named profile from the currently displayed configuration.
• Delete removes a profile. At least one profile must remain.
• The key-capture options include a numpad preference. The editor also offers Dark and Light appearance.
• INI Path and Load are advanced controls for loading a configuration file. Leave the normal path unchanged unless you specifically need to work with another configuration.

If the Turbo window opens with missing text, close it, enable Compatibility mode next to Turbo Setup in the patcher and reopen the tool. This setting affects the Turbo editor's display.

Addons

Open Client Tools > Addons to install or remove supported visual customizations. Close game clients before changing files and wait for the operation to finish. Check the reported installed state, then restart the game to see the result.

Official visual addons, renderer choices and the Custom GRF controls.

Official visual addons

Addon	Available choices
Wide Description Skin	On or Off.
Transparent Skillbar	On or Off.
Original Cursor	On or Off.
HD8Bit Damage Font	On or Off.
Hotbar Numbers	White, Black or Off.
Original Casting Circle	On or Off.

Off removes that official visual override. The appearance then comes from the remaining installed game and custom assets.

Reset official add-ons switches the official visual addons off together. It keeps your custom and gray textures and does not reset the Renderer selection.

Renderer

The Renderer row offers Default, DXVK and dgVoodoo. Default restores the renderer choice without one of these local wrappers. DXVK and dgVoodoo are alternative graphics compatibility options; their results depend on the computer and driver.

The Renderer choice and Game Setup's Graphics API are separate settings. After changing Renderer, reopen Game Setup, review the detected graphics device and mode, test if needed and save. An unrecognized custom renderer can prevent graphics detection; select a supported Renderer option before trying again.

Custom GRF

Custom GRF is the supported place for permitted custom asset archives. You do not need to edit GRF.INI or merge changes into the patcher's managed game archives.

• Replace from archive replaces the saved custom collection with the selected archive and enables it.
• Merge archive adds to the saved collection and enables it. If both contain the same file path, the incoming file replaces that entry.
• Off disables the custom collection while retaining it for later.
• On re-enables the saved collection. If no collection is saved, it opens archive selection.

Supported input formats are GRF, GPF, ZIP, RGZ and compatible additive THOR archives. Imports are checked before installation. Protected content and malformed archives are rejected. THOR files that delete content or do not merge into a GRF are not supported here. This is an asset importer, not a DLL or executable installer.

Headgear, NPC, monster and class sprite replacements are not permitted. Importing an archive does not change those customization rules.

Custom assets can take priority over official visual addons. If an addon appears unchanged, temporarily turn Custom GRF off and restart the game to check for an overlapping custom file.

Older manual downloads for a transparent menu or original textures do not have their own official addon buttons. A compatible permitted asset archive can be imported through Custom GRF. Old links and archives should not be assumed to work with the current client.

/greymap + LGP

Open Client Tools > /greymap + LGP to install gray-map textures, customize tiles and change LGP artwork. Close the game before changing these files and restart it afterward.

Gray-map sources, custom tiles and LGP image controls. Scroll within the panel for more options.

Gray-map textures

1. Choose the built-in Gray or Vik Green source.
2. Click Install / Replace and wait for the success message.
3. Launch the game and use /greymap to toggle the installed gray textures.

Clear installed gray empties the installed gray texture archive. Use the in-game /greymap command when you only want to turn the display off temporarily. The patcher does not show whether the in-game toggle is currently on.

Replace from archive installs a compatible custom gray texture set. Merge archive adds compatible textures to the existing set. Keep your source archive if you might want to reinstall it later.

Gray imports accept recognized gray-grid BMP textures. Ordinary world textures, map geometry, scripts, effects and sprites do not belong in this importer. Map shapes and movement permissions remain server-controlled.

Custom tiles

You can choose images for Walkable, Blocked, Water and Snipable tiles.

Choose an image for each tile type you want to change, then apply the selected images.

1. Use Choose image for each tile type you want to change.
2. Review the selected images.
3. Click Apply selected images and wait for completion.
4. Restart the game and use /greymap.

Only the selected tile types change. Reset returns one tile type to its built-in artwork. Empty or void areas use the blocked tile.

Images must be PNG or BMP, at most 8 MB and no larger than 2048 x 2048 pixels. Tile artwork is converted to 32 x 32 pixels without transparency. Changing a tile's image does not change where your character can move or attack.

LGP images

The LGP section changes the artwork for Circle, Square, All skill floors or an individual skill's floor image.

1. Close the game. If you previously turned Custom GRF off, turn it back on in Addons. No separate archive is needed for your first LGP image.
2. Select the image or skill to change. Search by name, skill ID or effect ID if needed.
3. Use Choose image, inspect the selection and click Install image.
4. Restart the game to load the changed artwork.

Seen last session filters the list to floor skills recorded during your last game session. If the list is empty, play a session containing floor skills first. Individual skill images take priority over the All skill floors artwork.

LGP imports accept PNG or BMP up to 8 MB and 2048 x 2048 pixels. Transparency is preserved. Reset image removes the selected custom override. A reset skill can then use your All skill floors artwork if you have customized it. Restore all originals removes the custom LGP artwork while keeping unrelated custom assets.

Proxy Latency

Open Proxy Latency to compare measured connection routes. Refresh repeats the measurement. Best marks the route with the lowest calculated score in that measurement.

The results can include estimated route delay, hop delay and failed connection probes shown as loss. This loss value is not a direct measurement of in-game packet loss. Conditions can change, so the lowest result is not a guarantee of the best connection throughout a game session. This window measures routes; clicking or refreshing it does not select your in-game proxy.

Crash diagnostics

Automatically send crash diagnostics controls automatic report uploads where supported. It is enabled by default. Turning it off keeps reports local instead of uploading them automatically.

The patcher can show whether reports were sent, retained or are waiting for another attempt. If you report a crash to support, include what you were doing and the approximate time even when automatic diagnostics are enabled.

Troubleshooting

Problem	What to check
Login or game launch is unavailable	Wait for patching to finish. Read the current status or error. If an update is required, close game clients and complete it.
Game Setup keeps opening before launch	Select a detected device and supported mode, then Save. Close the window after the success message. A preview or Cancel does not save the configuration.
No graphics device or an unsupported renderer is reported	Check Addons > Renderer and select a supported option. Reopen Game Setup afterward. Original-client graphics detection on Linux requires a working Wine environment.
Graphics fail after changing renderer or driver	Reopen Game Setup and review the detected device. Try a supported windowed mode and Test graphics, then Save. Reset display and audio can refill the form with defaults.
Saving reports that settings changed elsewhere	Close other setup tools and game clients. Close and reopen Game Setup to load the current values, then make the changes again.
Saving reports a permissions or shared-settings error	Follow the exact error. Close every original client when requested. If it persists, send support the error text and patcher version.
A game account still shows Online	Use Click to Kick if you intend to disconnect it, wait a few seconds and Refresh Now before trying again.
Turbo does nothing	Check the binding key, hotbar assignment and active profile. Save the configuration and enable the controller with Alt plus its Pause Key. Hold the binding key while the game is focused. Restart the game if it has not picked up the saved configuration.
Turbo Setup has missing text	Close the tool, enable its Compatibility mode in the patcher and reopen it.
An addon or LGP image is not visible	Check that the operation succeeded and restart the game. Check Custom GRF state and possible overlapping custom assets.
Gray textures have not changed	Confirm that textures are installed, restart the game and check the in-game /greymap toggle. Installing textures and enabling their display are separate steps.
Interface or chat windows are misplaced	Close the game and use Game Setup > Maintenance > Reset window and chat positions. Keep the reported backup.

For support, copy the patcher version and the exact status or error message. Include your operating system, selected renderer and the steps that reproduce the problem. A screenshot of the error can help; hide account details and never include your password.